Spare parts and components

Serve for the electrical connection of the moving elements of the current collector.

They are made of «PShch-6» copper wire. Along the edges, there is an end terminal with holes for M10 bolt (1600 and 1400), M8 bolt (800 and 600). Shunts are installed in sections: four shunts (between the upper frame and the runner), two shunts (between the upper frame and the carriage), two shunts (between the upper and lower frame), and two shunts (between the lower frame and the base)

• АТ-160-000.1300 СБАТ-160-000.1300 СБ
• АТ-160-000.1400 СБАТ-160-000.1450

The rod assembly (assembling carriage) is designed for the montage a current collector on it.

It includes a 42x4 mm duralumin base, at the edges of which a plunger lever carriage is installed, which provides the elastodynamic properties of the runner in a vertical plane when it slides along the contact wire.

• АТ-160-000.0450 СБ (0906.07.000 СБ)АТ-160-000.0500-50

The holder (the plunger lever carriage) is designed for the elastic connection of the runner with the current collector of the electric rolling stock.

The carriage is used on current collectors of type TL 13, TL 14 of all modifications, current collectors of all TA series produced by SET.

• АТ-160-000.600 СБАТ-160-000.0640 СБ

The constituent element of the lifting-lowering mechanism is served to transfer the lifting force from the air spring assembly to the bottom frame of the current collector.

It is used on asymmetric current collectors of light and heavy types, intended for electric rolling stock, AC and DC main railways.

It consists of a soft stainless steel cable DIN 3060 (GOST 3070-88) with a loop, an eyelet, and an end terminal. Two cables are attached to one air spring

• АТ-160-000.0900 СБ

It serves for installation on the runner to ensure smooth entry of the contact wire on the working surface of the runner on the arrows of the contact network.

Made of steel pipe with a protective anti-corrosion coating. Two steel plates with holes are welded to the ends of the pipe for fastening to the carcass of the runner.

• АТ-160-000.0840 СБ

It is used on asymmetric current collectors of light and heavy types, intended for electric rolling stock, AC and DC main railways.

The cradle of current collector frame is generally intended to the vertical displacement of the top roll in the operating region.

Designed for vertical movement of the top node in the working range and made of pipes and parts of aluminum alloy AMg6. Consists of: pipes, reinforced with linings; cross member, on which the node is installed upper current collector; a mechanism, which serves for the swiveling with the frame and the rod on the other side.

• АТ-160-000.0300АТ-160-000.0400
• АТ-160-000.0340-10АТ-160-000.0400-50

The air spring consists of a rubber-cord corps and can be of two types: two-section and three-section. It includes a Z-shaped mechanism that provides a movement in the same plane. It is possible to install a pneumatic fitting.

• АТ-160-019.0700 СБ

1. Pressure regulator

   It is destined to reduce the pressure of compressed air and maintain it at a given level with high accuracy.IR2010-F02

2. Pneumatic distribution block

   It includes three types of switches, such as a piston, a roller/lever, a roller with breaking lever. Return is carried out by a mechanical spring.338-945 «Camozzi»

Contact carbon inserts set on the carcass of the runner. Inserts directly spend current collecting from the contact wire.

• 574609.700 КБ574.700 КЦ

Contacts are destined for assembling electrical devices of high-speed switches and contactors. They are used in electric rolling stock of the main and urban ERS, also in traction substations and in non-traction power supply systems.

Details are manufactured from the powder cooper by the extrusion technique, excluding a porosity and voids.

• ED 52529ED 66885ED 534894ED 532181ED 42219ED 44944ED 42597ED 433513
• ED 433514ED 430649ED 430648ED 532181Т93.81.16.00Т93.71.40.008ТР.551.0388ТР.557.026
• 8ТР.551.0408ТР.551.1908БК.551.088-18ТР.551.0308ТН.551.0238ТЕ.551.0088ТЕ.551.009

Serve for installation in the cabin of urban transport.

Powder coating has both aesthetic and electrical insulating properties.

They are made of steel oval tube with further powder coating.

• SRF 94-N2H5-B11040SRF94-T4W6-B12044SRF94-T4W6-B21044SRF94-N2H5-B11039SRF94-N2L2-B11041SRF94-N2L2-B12041SRF94-N2L3-B11040NSRF94-N2L3-B12040N
• SRF94-N2L3-B21040NSRF94-N2L3-B31040NSRF94-N2U1-B11041SRF94-N2U1-B12041SRF94-N2U1-B21041SRF94-N2U1-B31041SRF94-P1HG-011041PSRF94-P1HG-021041P